SOLD Ecotech Vectra guards

[TORX]

I now have Vectra guards. I can add what ever you want for design of the guard, this is just an example of me going over board with logos. This has the Ecotech logo shape and incorporated the Mobius logo into it. This is the S2, the M2 and L2 will be ready to custom print starting Friday.

$20 plus shipping.

 

[Canadianeh]

Nice. It is not long just like the OEM one.

what’s the dimension once it is screwed on? Can you put picture from the side installed on M2 pump with measurements?

 

[TORX]

Nice. It is not long just like the OEM one.

what’s the dimension once it is screwed on? Can you put picture from the side installed on M2 pump with measurements?

As soon as I have the M2 designed and printed I will post it. This was just a test fit, proof of concept, for the threads. I typically print to order to meet custom requests. I can do just about any shape or thickness.

This is the S2 which has a smaller input then the M2. The flange sits flush with the thread and the thickness of the cage is 3/4" on this one.

I have a volute from a S2, M2 and L2 as well as a wet side Vortech 10, 40 and 60 now so Ecotech designs will be awesome. The only thing I don't have is an XR30 to test designs on

Sent from my SM-G988W using Tapatalk

 

[Seasquirt]

Anything for the M1


Sent from my iPhone using Tapatalk

 

[Canadianeh]

As soon as I have the M2 designed and printed I will post it. This was just a test fit, proof of concept, for the threads. I typically print to order to meet custom requests. I can do just about any shape or thickness.

This is the S2 which has a smaller input then the M2. The flange sits flush with the thread and the thickness of the cage is 3/4" on this one.

I have a volute from a S2, M2 and L2 as well as a wet side Vortech 10, 40 and 60 now so Ecotech designs will be awesome. The only thing I don't have is an XR30 to test designs on

Sent from my SM-G988W using Tapatalk

So to install it, do you have to screw them on?

 

[TORX]

So to install it, do you have to screw them on?

Yes, they just screw on the thread.

 

[TORX]

Base for the M2 fits perfect. No cage printed yet. I will add design pictures/suggestions later. Next is to design and fit the L2

Sent from my SM-G988W using Tapatalk

 

[TORX]

S2, M2, and L2 bases are good. Working on sample designs now but can custom just about anything

Sent from my SM-G988W using Tapatalk

 

[TORX]

Here is a mock up of the L2. This cage is 1" deep. The base screws onto the pump and the cage clicks on. It can come apart to clean. I can do just about any shape or pattern in the guard, just ask.

 

[TORX]

So to install it, do you have to screw them on?

I can do just about anything though, if you want it to push fit, I can do that also.

 

[TORX]

Standard round ones like pictured above, $25 shipped within Ontario for either size pump. Many colors available. These are currently print to order so may take a day or 2 to ship. Shipped orders typically take 1-2 business days to be delivered.