I recently posted my confusion about "good" water conditions and yet, my zoanthids are 30% closed (I have 8 species and 2 species are completely closed for every example, while others look "ok").
My Yellow sun polyps are not looking great... a torch head detached and a shrimp died...
Well....
I was testing my Nitrates with the API test, which requires that bottle #2 be shaken vigorously for a minute before use. I wasn't.. so, my test result went from 5 to 40. I didn't even trust that so I went to buy a salifert kit which I have used in the past and... I have 60 nitrates! That would indeed explain a LOT about what's going on in the tank.....
So I'm a pretty methodical guy... here is what I'm doing:
1) I did (almost immediately) a water change.. I replace 2 gallons at a time out of 14 (that's about as much as I can do given various constraints. I wAS previously doing that every 2 weeks. For the next two weeks, I'll be doing that twice a week.
2) I have finally figured out my mini fuge which in the back of the Nuvo 14 is a small chamber with a growing ball of Caulurpa (The chaeto melted for some reason, but the caulurpa is growing). There is a 4w led light that shines 16 hours a day in there with good flow.
3) I have added nitrate pad from Acurel (I simply replaced the white floss material with a double ply of that and will replace every other week (as I know it gets old fast).
4) I added a small bag of Purigen in the return pump area (probably 2 ounces worth for me 14g tank).
My hope is that all this will bring my No3 PPM from 60 to 10 within a couple weeks. Then hopefully the coral will start to look as it should.
Thoughts?
My Yellow sun polyps are not looking great... a torch head detached and a shrimp died...
Well....
I was testing my Nitrates with the API test, which requires that bottle #2 be shaken vigorously for a minute before use. I wasn't.. so, my test result went from 5 to 40. I didn't even trust that so I went to buy a salifert kit which I have used in the past and... I have 60 nitrates! That would indeed explain a LOT about what's going on in the tank.....
So I'm a pretty methodical guy... here is what I'm doing:
1) I did (almost immediately) a water change.. I replace 2 gallons at a time out of 14 (that's about as much as I can do given various constraints. I wAS previously doing that every 2 weeks. For the next two weeks, I'll be doing that twice a week.
2) I have finally figured out my mini fuge which in the back of the Nuvo 14 is a small chamber with a growing ball of Caulurpa (The chaeto melted for some reason, but the caulurpa is growing). There is a 4w led light that shines 16 hours a day in there with good flow.
3) I have added nitrate pad from Acurel (I simply replaced the white floss material with a double ply of that and will replace every other week (as I know it gets old fast).
4) I added a small bag of Purigen in the return pump area (probably 2 ounces worth for me 14g tank).
My hope is that all this will bring my No3 PPM from 60 to 10 within a couple weeks. Then hopefully the coral will start to look as it should.
Thoughts?