reef keeper
Super Active Member
- Joined
- Nov 19, 2014
- Location
- Hamilton, Ontario
i have a question. And an observation. And a question lol
I had begun using a calcium reactor, and had it dialled way down, as my calcium requirements are actually being met by my bi-weekly water changes.
My alk was actually up to 11.5, and my calcium was 500.
Question 1.
Why was my magnesium down to only 1100? I dosed it up to 1300 over 2 days, and within 3 days, it had fallen again to 1150.
My alk has fallen to 9.6 and calcium is 480 now
I am using only Kalkwasser in my ATO
Question 2.
I had a bit of cyano on the glass, and on the substrate when. The calcium and alkalinity were high.
Now that I have stopped using the calcium reactor to try to lower my levels, the cyano has comp,Evelyn disappeared in the tank.
In the refugium, there was quite a bit on the chaeto. I harvested some of the chaeto and removed the cyano from the fuge.
I've decided to lower my alk to around 8, and look for calcium around 450.
Once the levels reach there, I'll restart the reactor very slowly, and get it running properly
Please explain to my what is going on lol
I had begun using a calcium reactor, and had it dialled way down, as my calcium requirements are actually being met by my bi-weekly water changes.
My alk was actually up to 11.5, and my calcium was 500.
Question 1.
Why was my magnesium down to only 1100? I dosed it up to 1300 over 2 days, and within 3 days, it had fallen again to 1150.
My alk has fallen to 9.6 and calcium is 480 now
I am using only Kalkwasser in my ATO
Question 2.
I had a bit of cyano on the glass, and on the substrate when. The calcium and alkalinity were high.
Now that I have stopped using the calcium reactor to try to lower my levels, the cyano has comp,Evelyn disappeared in the tank.
In the refugium, there was quite a bit on the chaeto. I harvested some of the chaeto and removed the cyano from the fuge.
I've decided to lower my alk to around 8, and look for calcium around 450.
Once the levels reach there, I'll restart the reactor very slowly, and get it running properly
Please explain to my what is going on lol