The ones I am finding has the basket as 1.050 inch and/or 13/16". That could work. I would be interested in them. I am still reading on it, but if you can get even distribution of spray, then it will get the pellets that are in the corner. That is an issue that cone reactors do not have. For the cylinder ones, some pellets can get stuck in the bottom corners where flow can be limited. You have to increase flow to be sure to keep things fluidized there. How much water can you push through it. Right now I have a Mag9.5, on full it runs at 975 gph. Although if there was proper distribution of the water, then it would need less gph through the media.