Looking For Internal Overflow

[milanz]

Hi, I need a center overflow built, 14" x 6.5 x 21.5H. Can someone recommend who can build one for me?

 

[Pistol]

I think Miracles builds them

 

[dale]

acrylic or glass?

 

[milanz]

acrylic or glass?

Black acrylic

Sent from my SM-G930W8 using Tapatalk

 

[dale]

i have a couple small pieces of black, def not enough. i can easily build you one if i have the materials... if you can do it as well there is no point in me but if you cant, then if we get materials i will do it for you .

 

[dale]

i got one here but its only 12x 16 high

 

[milanz]

i have a couple small pieces of black, def not enough. i can easily build you one if i have the materials... if you can do it as well there is no point in me but if you cant, then if we get materials i will do it for you .

I'd like to learn how to do it properly. Do you use a router and jig for the teeth? I can definitely buy the materials. Would 1/4 be enough?

Sent from my SM-G930W8 using Tapatalk

 

[dale]

i would prob use a table saw but we could prob get out the router and set something up,,, im not an acrylic builder so i cant guarantee perfection if thats what you need but i am experienced and pretty skilled at this kind of stuff and im confident i could produce something very presentable.. but if you need that absolute perfection, you would need a pro.. my fee would be very minimal as i enjoy doing this stuff. 1/4 in would be plenty.

 

[dale]

or if you want cheap we could add clear to the bottom of what i have here but the bottom 6in would be ugly

 

[milanz]

I would probably want to do all black. Do you know of a good place to buy acrylic?

Sent from my SM-G930W8 using Tapatalk

 

[dale]

there were a couple places in london , dunno if there still is... its pricey stuff,, ill look around a bit.. i saw this...https://www.ebay.ca/itm/Aquarium-Ce...573161?hash=item2f46664fe9:g:uEAAAOSwT-hfB~sA

 

[Matt1997]

Contact Fabco or plasticworld. Fabco usually cheaper.

 

[Josh]

The overflow on my new frag tank is 3d printed. Thought it was pretty cool to see the industry moving that way. Its reinforced with glass behind it though.

 

[milanz]

there were a couple places in london , dunno if there still is... its pricey stuff,, ill look around a bit.. i saw this...https://www.ebay.ca/itm/Aquarium-Ce...573161?hash=item2f46664fe9:g:uEAAAOSwT-hfB~sA

I saw that one. Unfortunately the bulkhead spacing is wide on mine and needs to be about 14"

Sent from my SM-G930W8 using Tapatalk

 

[milanz]

Contact Fabco or plasticworld. Fabco usually cheaper.

Thanks. I will look them up!

Sent from my SM-G930W8 using Tapatalk

 

[dale]

I saw that one. Unfortunately the bulkhead spacing is wide on mine and needs to be about 14"

Sent from my SM-G930W8 using Tapatalk

because of course its that way... lol

 

[bluewater]

Hi all

I have two pieces of black 1/4 inch here. Ones 36 inches the other 55. Problem is they are 5 inches wide

I also have 1/4 inch clear in your dimensions. Are you desperate enough to krylon you overflow ?.....

Also have glass pieces

I'd gladly trade for something small

Cheers