Doser Mounting

[Copperkills]

Hey folks,

Has anyone mounted their doser on a vertical plane rather than horizontal. I've read some threads on other forums suggesting that dosing accuracy is lost when mounting the pump heads horizontal rather than keeping them vertical.

 

[TORX]

So long as you can be sure the lines dont get linked you should be fine. So you would need a way to support everything

Sent from my SM-G950W using Tapatalk

 

[cica]

I have my jebao doser standing vertically since I bought it (used) about 3-4 years ago. No issues with dosing, works just fine.

 

[Copperkills]

I have my jebao doser standing vertically since I bought it (used) about 3-4 years ago. No issues with dosing, works just fine.

Pumps at the top or the bottom?

 

[cica]

I have them on the side, facing the door of the cabinet.
I personally wouldn't put them on the top, just in case the tubing inside cracks, it might leak the fluid inside and damage the circuit board. I don't see any problem facing them to the bottom.