"lasers"

[hark]

This may be a solution to my vermetid snail problem in my 220!!! Think it would work on them??

Yep it will blow right through them if you can focus it long enough on them

Sent from my BBD100-2 using Tapatalk

 

[marks69]

how do you change the focus without the tip on?

 

[EricTMah]

I also ordered a set of these
EastVita GTF 4PCS 3.7V 16340 2500mAh Li-ion Rechargeable Battery For LED Flashlight Torch https://www.amazon.ca/dp/B018FWJ7MQ/ref=cm_sw_r_cp_apa_i_LdroCbNZ94FW5

2500mAh batteries instead of the crappy 1300mAh ones it came with. Hopefully have the power last a bit longer and be able to zap more things in one go.

S8

 

[EricTMah]

how do you change the focus without the tip on?

The end where the beam comes out should twist until you get the proper focal point

S8

 

[TORX]

I also ordered a set of these
EastVita GTF 4PCS 3.7V 16340 2500mAh Li-ion Rechargeable Battery For LED Flashlight Torch https://www.amazon.ca/dp/B018FWJ7MQ/ref=cm_sw_r_cp_apa_i_LdroCbNZ94FW5

2500mAh batteries instead of the crappy 1300mAh ones it came with. Hopefully have the power last a bit longer and be able to zap more things in one go.

S8

Added those suckers to my cart for later

Sent from my SM-G950W using Tapatalk

 

[EricTMah]

Added those suckers to my cart for later

Sent from my SM-G950W using Tapatalk

Nice.
Not the greatest delivery time. That's why I ordered them right away.

Should make a difference. Plus having 4 sets will make the task last longer.

S8

 

[marks69]

thanks. it was so tight i had to use channel locks.lol

 

[TORX]

Glass is surprisingly reflective. Shoot straight in and be careful of the laser reflection. You can easily burn yourself or stay a fire behind you and not even notice

Sent from my SM-G950W using Tapatalk

 

[EricTMah]

@TORX
Do you just hold it tight against the glass when you're frying stuff?

S8

 

[TORX]

@TORX
Do you just hold it tight against the glass when you're frying stuff?

S8

I try to. Got a warm knuckle once and have been pretty cautious since. I have a peice of black acrylic that I use as a shield sometimes when I need to do an angle. I also do it at night or when the room is dark so I can see the reflection as well.

Sent from my SM-G950W using Tapatalk

 

[hark]

I have extra batteries I bought 3 sets I think if anyone wants to borrow temporary

Sent from my BBD100-2 using Tapatalk

 

[4Hummer]

are you using a lens or anything on the laser. Just purchased one. Seems like I need to hold the laser on the same spot for over 3 minutes before I notice anything even happening

 

[TORX]

are you using a lens or anything on the laser. Just purchased one. Seems like I need to hold the laser on the same spot for over 3 minutes before I notice anything even happening

Not using any tips. Just need to focus the laser and be sure the batteries are fully charged.

Sent from my SM-G950W using Tapatalk

 

[4Hummer]

Not using any tips. Just need to focus the laser and be sure the batteries are fully charged.

Sent from my SM-G950W using Tapatalk

Thanks I will try and focus the laser to a tighter beam. didn't realize the metal knob the lenses screw into could be turned to focus the laser. Of course now the batteries are dead. Will try again tonight.

 

[4Hummer]

OK love this thing. I feel like Darth Vader with his light saber..

You know the focus is correct when you hear Snap Crackle Pop after a second of the laser pointed on a target. The focus has to be adjusted every time you move the laser and while using as the battery drains.

 

[TORX]

It is kinda fun.

On the focusing part, I made this and it helps so much.

Sent from my SM-G950W using Tapatalk

 

[TORX]

I also ordered a set of these
EastVita GTF 4PCS 3.7V 16340 2500mAh Li-ion Rechargeable Battery For LED Flashlight Torch https://www.amazon.ca/dp/B018FWJ7MQ/ref=cm_sw_r_cp_apa_i_LdroCbNZ94FW5

2500mAh batteries instead of the crappy 1300mAh ones it came with. Hopefully have the power last a bit longer and be able to zap more things in one go.

S8

Will I need another charger or wo the one that came with the laser work? Trying tui order while at work and forgot to check earlier

Sent from my SM-G950W using Tapatalk

 

[marks69]

It is kinda fun.

On the focusing part, I made this and it helps so much.

Sent from my SM-G950W using Tapatalk

you gotta make me one of these

 

[EricTMah]

Will I need another charger or wo the one that came with the laser work? Trying tui order while at work and forgot to check earlier

Sent from my SM-G950W using Tapatalk

The charger that came with the unit should work just fine

S8

 

[EricTMah]

It is kinda fun.

On the focusing part, I made this and it helps so much.

Sent from my SM-G950W using Tapatalk

You should sell me one like that

S8