Neopimp link said:There is no custom plug.. just get an old network cable and cut it in half.... Can use a multimeter or the pin out that is in the manual or the in the \"Non Official Apex Guide\" that is kicking around to figure out which wires are being used by the apex. Just Google It.
An yes you will need to purchase that Variable Voltage unit to dim your LED with the Junior.
phi delt reefer link said:sasha grey no longer does public anal... she now reads to school children... jeez Zakk, read a paparazzi blog once in a while.
Neopimp link said:You should be able to dim all the drivers from one of the ports. DEpending on which drivers you have anyways. Just need to make sure you get the color mixtures right if are dimming the entire thing from one port. If you have the Meanwell Dimmables you can adjust the max current with the screw on the inside of the unit to get the color you want between the blues and whites. With that set you can dimm from that point to 0 with the apex.
Neopimp link said:That way if you dont liek your color then you are having to swap out leds instead of just dimming one color down?